Rohde & Schwarz CMU 200 - Page 351

CMU Audio Generator and Analyzer (with Option CMU-B41)
1100.4903.12 6.85 E-10
CONFigure:MULTitone:AF1Channel:FILTer:WEIGhting <Weighting> Weighting
CONFigure:MULTitone:AF2Channel:FILTer:WEIGhting <Weighting>
<Weighting>
Description of parameters Def. value Def. unit FW vers.
CME |
CCI |
OFF
Switch on C-message weighted filter
Switch on CCITT weighting filter
No weighting filter
OFF – V3.0
Description of command
This command selects the weighting filter to be included in the AF input signal path.
DEFault:MULTitone:AF1Channel:FILTer <Enable> Default Settings
DEFault:MULTitone:AF2Channel:FILTer <Enable>
<Enable>
Description of parameters Def. value Def. unit FW vers.
ON |
OFF
The parameters are set to their default values
Some or all parameters differ from the default values
ON – V3.0
Description of command
If used as a setting command with the parameter ON this command sets all parameters of the subsystem to their
default values (the setting OFF results in an error message).
If used as a query the command returns whether all parameters are set to their default values (ON) or not (OFF).
DEFault:MULTitone:FILTer <Enable> Default Settings
<Enable>
Description of parameters Def. value Def. unit FW vers.
ON |
OFF
The parameters are set to their default values
Some or all parameters differ from the default values
ON – V3.0
Description of command
If used as a setting command with the parameter ON this command sets all parameters of the subsystem (includ-
ing AF1Channel and AF2Channel) to their default values (the setting OFF results in an error message).
If used as a query the command returns whether all parameters are set to their default values (ON) or not (OFF).