Startup of the CMU CMU
1100.4903.12 2.6 E-9
Step 4
SETUP
! Press the SETUP key to access general
device settings.
! Press the Time hotkey to switch over to
the Time tab of the Setup menu.
"
Step 5
The Time tab of the Setup menu displays
the current time zone, time and date.
#
! Use the rotary knob to move the focus
onto the Time section of the Setup table.
If necessary, press the rotary knob or the
ON/OFF key to expand the parameters in
the table (see Chapter 3).
! Move to one of the input fields associ-
ated to the Time parameter, select with
ENTER and use the rotary knob or the
numeric keypad to correct the settings for
the current time. Hours, minutes and
seconds can be edited separately.
! Press ENTER to confirm the entries and
quit the input fields.
! Move to Zone select field, activate with
ENTER, and use the rotary knob to
choose your own time zone.
!
In the same way, activate the Format
select field and use the rotary knob to
switch over between European and North
American time conventions.
To Next Page
Loading...
Need help?
General
