CMU Startup of the CMU
1100.4903.12 2.7 E-9
Additional Information... Alternative Settings
and Measurements
... on Step 4
" Softkeys and hotkeys
Softkeys and hotkeys are activated by pressing the associ-
ated keys on both sides and across the bottom of the display.
The general purpose of softkeys is to provide settings, con-
trol the generator and the measurements. Hotkeys are used
to switch over between different menus and different tabs be-
longing to a popup menu.
&
Chapter 3
... on Step 5
# Setup menu
The Setup menu comprises several tabs providing general
instrument settings. It is advisable to check and adjust the
factory settings when you operate the CMU for the first time.
To switch over between the tabs of the setup menu use the
hotkeys displayed at the bottom of the display.
& Chapter 4
The different types of menus and
control elements of the graphical
user interface is explained in
Chapter 3. In the same Chapter
you can find a short tutorial on the
entry of numbers and characters.
To Next Page
Loading...
Need help?
General
