wsm M7040 - Page 96

GENERAL
M6040, M7040, WSM
G-75
Hydraulic Brake Adaptor
Application
• Use for testing the hydraulic brake oil linkage.
NOTE
• The following special tools are not provided, so make them referring to the figure.
9Y1210143GEG0108US0
A 18 mm (0.71 in.) J 0.79 rad (45 °)
B 15 mm (0.59 in.) K 6 mm (0.24 in.)
C 15 mm (0.59 in.) L 5 mm (0.20 in.)
D 3 mm (0.12 in.) M 4 mm (0.16 in.)
E 0.79 rad (45 °) N 2 mm (0.079 in.)
F 0.52 rad (30 °) O 2 mm dia. (0.079 in. dia.)
G PS 1/4 P 5 mm dia. (0.20 in. dia.)
H M7 × P1.0 Q 17 mm (0.67 in.)
I 0.79 rad (45 °) R 19.6 mm (0.77 in.)
KiSC issued 07, 2012 A