Barco HDF W series - Page 101

9. Image
Sync
pulse
Clamp
pulse
Clamp
delay
Clamp
width
Leading edge
Trailinging edge
Image 9-50
How to change the clamp delay - clamp width
1. Press Menu to activate the menus and select Image → Timings → Advanced settings. (image 9
-51, image 9-52, image 9-53)
2. Press ENTER to select. (image 9-54)
3. Use the ▲ or ▼ key to select Clamp Delay or Clamp Width and use the ◄ or ► key to change the value.
Or,
press ENTER to open the specific adjustment menu. Follow the adjustment method as described in "Navigation and adjust-
ments", page 64.
Image 9-51
Main menu, Image
Image 9-52
Image, timings
Image 9-53
Timings, advanced settings
Image 9-54
Clamp delay
R5905158 HDF W SERIES 10/07/2012 97