Canon LBP6780x - Page 399

(RAW_BIDIR_ENB)
[Use IPP Print] (IPP_ENB) ON, OFF OFF
[SSL]
ON, OFF (Fixed at OFF
when a key is not
registered.)
OFF
[IPP Authentication]
(IPP_AUTH_ENB)
ON, OFF ON
[User Name]
(IPP_AUTH_ACCUNT1)
Up to 24 characters (Must
be entered when using IPP
Authentication)
guest
[Password]
(IPP_AUTH_PASSWD1)
Up to 24 characters (Must
be entered when using IPP
Authentication)
7654321
[Use WSD Printing] (WSD_ENB) ON, OFF OFF
[Use WSD Browsing]
(WSD_BROWSING)
ON, OFF OFF
[Use Multicast Discovery]
(WSD_MULTICAST_DISCOVERY)
ON, OFF OFF
[Use HTTP] (HTTP_ENB) ON, OFF ON
[Use Proxy] ON, OFF OFF
[HTTP Proxy Server Address]
Up to 128 alphanumeric
characters
(Blank)
[HTTP Proxy Server Port Number] 1 to 65535 80
[Use Proxy within Same Domain] ON, OFF OFF
[Proxy Authentication] ON, OFF OFF
[User Name]
Up to 24 alphanumeric
characters
(Blank)
[Password]
Up to 24 alphanumeric
characters
(Blank)
[Discovery Response]
(DISCOVERY_ENB)
ON, OFF ON
[Scope Name]
(DISCOVERY_SCOPE_NAME)
Scope name to be used for
discovery using utility
software such as NetSpot
Device Installer. (Up to 32
characters)
default
[Use SNTP] (SNTP_ENB) ON, OFF OFF
[NTP Server Name]
(SNTP_ADDR)
IP address or host name (Blank)
[Polling Interval]
(SNTP_INTERVAL)
Interval for synchronizing
time (1 to 48 hours)
24
TCP/IP (IP v. 6) Settings
: Can be specified : Cannot be specified
Option Contents Default
Settings
Using
NetSpot
Device
Settings
Using
FTP
Client
Settings
Using the
Control
Panel
㻟㻥㻥㻌㻛㻌㻥㻣㻜