When the [Use IPP Authentication] check box is selected, set the following items.
[User Name]
Enter the user name used for the IPP print user authentication function. Up to 24
characters can be entered.
[Set/Change
Password]
Select the check box when setting/changing the password.
[Password]
Enter the password used for the IPP print user authentication function. Up to 24
characters can be entered.
[Confirm] For confirmation, enter the same [Password] again.
IMPORTANT
When the [Use IPP] check box is selected
The HTTP setting [Use HTTP] turns [On] automatically.
"HTTP Settings"
When Not Using IPP/IPPS Printing
Clear the [Use IPP] check box.
(3) Click [OK].
Proceed to Step 6 if you do not specify the settings for the other options.
WSD Settings
(1) Click [Edit...] in [WSD Print Settings].
㻠㻠㻜㻌㻛㻌㻥㻣㻜
To Next Page
Loading...
