C
HAPTER
9
| System Commands
– 211 –
system access
delete
This command deletes an access management entry.
SYNTAX
system access delete access-id
access-id - Entry index. (Range: 1-16)
EXAMPLE
System/Access>delete 1
System/Access>
system access
lookup
This command displays specified access management entry.
SYNTAX
system access lookup access-id
access-id - Entry index. (Range: 1-16)
EXAMPLE
System/Access>lookup 1
Idx Start IP Address End IP Address WEB SNMP TELNET
--- ------------------------------- ------------------------------ ---- ---- -----
1 192.168.1.0 192.168.2.0 Yes NO NO
System/Access>
system access clear This command clears all access management entries.
SYNTAX
system access clear
EXAMPLE
System/Access>clear
System/Access>
system access
statistics
This command displays or clears access management statistics.
SYNTAX
system access statistics [clear]
clear - Clears all access management statistics.
To Next Page
Loading...
Need help?
General