Edge-Core ES4528V-38 - Snmp Configuration

C HAPTER 26 | SNMP Commands
– 336 –
snmp configuration This command displays the SNMP configuration settings.
SYNTAX
snmp configuration
COMMAND USAGE
This command provides information on all SNMP configuration settings,
including communities, users, groups, views, and access tables.
EXAMPLE
SNMP>configuration
SNMP Mode : Disabled
SNMP Version : 2c
Read Community : public
Write Community : private
Trap Mode : Disabled
Trap Version : 1
Trap Community : public
Trap Destination :
Trap IPv6 Destination : ::
Trap Authentication Failure : Enabled
Trap Link-up and Link-down : Enabled
Trap Inform Mode : Disabled
Trap Inform Timeout (seconds) : 1
Trap Inform Retry Times : 5
Trap Probe Security Engine ID : Enabled
snmp community add Adds or modifies an SNMPv3 community entry
snmp community delete Deletes an SNMPv3 community entry
snmp community lookup Displays SNMPv3 community entries
snmp user add Adds an SNMPv3 user entry
snmp user delete Deletes an SNMPv3 user entry
snmp user changekey Changes an SNMPv3 user password
snmp user lookup Displays SNMPv3 user entries
snmp group add Adds an SNMPv3 group entry
snmp group delete Deletes an SNMPv3 group entry
snmp group lookup Displays SNMPv3 group entries
snmp view add Adds or modifies an SNMPv3 view entry
snmp view delete Deletes an SNMPv3 view entry
snmp view lookup Displays SNMPv3 view entries
snmp access add Adds or modifies an SNMPv3 access entry
snmp access delete Deletes an SNMPv3 access entry
snmp access lookup Displays SNMPv3 access entries
Table 40: SNMP Commands (Continued)
Command Function