C
HAPTER
17
| IGMP Commands
– 283 –
COMMAND USAGE
IGMP throttling sets a maximum number of multicast groups that a port
can join at the same time. When the maximum number of groups is
reached on a port, any new IGMP join reports will be dropped.
EXAMPLE
IGMP>throttling 9 5
IGMP>
igmp filtering This command displays or sets IGMP group filtering for specified ports.
SYNTAX
igmp filtering [port-list] [add | del] [group-address]
port-list - A specific port or a range of ports. (Range: 1-28, or all)
add - Adds a new IGMP group filtering entry.
del - Deletes a IGMP group filtering entry.
group-address - IGMP multicast group address.
DEFAULT SETTING
None
COMMAND USAGE
Multicast groups specified by this command are denied access on the
specified ports. When filter groups are defined, IGMP join reports received
on a port are checked against the these groups. If a requested multicast
group is denied, the IGMP join report is dropped.
EXAMPLE
IGMP>filtering 9 239.1.1.1
IGMP>
To Next Page
Loading...
