C
HAPTER
13
| Link Aggregation Commands
– 244 –
■
When configuring static trunks on switches of different types, they
must be compatible with the Cisco EtherChannel standard.
■
The ports at both ends of a trunk must be configured in an identical
manner, including communication mode (i.e., speed, duplex mode
and flow control), VLAN assignments, and CoS settings.
■
Any of the Gigabit ports on the front panel can be trunked together,
including ports of different media types.
■
All the ports in a trunk have to be treated as a whole when moved
from/to, added or deleted from a VLAN.
■
STP, VLAN, and IGMP settings can only be made for the entire
trunk.
aggr configuration This command displays configuration settings for all link aggregation
groups.
SYNTAX
aggr configuration
EXAMPLE
Aggr>configuration
Aggregation Mode:
SMAC : Enabled
DMAC : Disabled
IP : Enabled
Port : Enabled
Aggr ID Name Type Configured Ports Aggregated Ports
------- ------ ------ ---------------- ----------------
1 LLAG1 Static 4-7 4,5
Aggr>
To Next Page
Loading...
