Edge-Core ES4528V-38 - Snmp User Changekey; Snmp User Lookup

C HAPTER 26 | SNMP Commands
– 349 –
EXAMPLE
SNMP/User>lookup
Idx Engine ID User Name Level Auth Priv
--- --------- -------------------------------- -------------- ---- ----
1 Remote william Auth, Priv SHA DES
2 Remote steve Auth, Priv SHA DES
Number of entries: 2
SNMP/User>delete 2
SNMP/User>
snmp user
changekey
This command changes an SNMPv3 user password.
SYNTAX
snmp user changekey engine-id user-name auth-password
[priv-password]
engine-id - The engine identifier for the SNMP agent on the remote
device where the user resides. (Range: 10-64 hex digits, excluding
a string of all 0’s or all F’s)
user-name - The name of user connecting to the SNMP agent.
(Range: 1-32 characters, ASCII characters 33-126 only)
auth-password - A plain text string identifying the authentication
pass phrase. (Range: 1-32 characters for MD5, 8-40 characters for
SHA)
priv-password - A string identifying the privacy pass phrase.
(Range: 8-40 characters, ASCII characters 33-126 only)
DEFAULT SETTING
None
EXAMPLE
SNMP/User>changekey 800007e5017f000007 william dogtails cattails
SNMP/User>
snmp user lookup This command displays SNMPv3 user entries.
SYNTAX
snmp user lookup [index]
index - Index to SNMPv3 user table. (Range: 1-64)
DEFAULT SETTING
Displays all entries.