C
HAPTER
11
| Authentication Commands
– 224 –
RADIUS Accounting Server Configuration:
=======================================
Server Mode IP Address Secret Port
------ -------- --------------- ------------------------------ -----
1 Disabled 1813
2 Disabled 1813
3 Disabled 1813
4 Disabled 1813
5 Disabled 1813
TACACS+ Authentication Server Configuration:
============================================
Server Mode IP Address Secret Port
------ -------- --------------- ------------------------------ -----
1 Disabled 49
2 Disabled 49
3 Disabled 49
4 Disabled 49
5 Disabled 49
Client Configuration:
=====================
Client Authentication Method Local Authentication Fallback
------- ---------------------- -----------------------------
console local Disabled
telnet local Disabled
ssh local Disabled
web local Disabled
Auth>
auth timeout This command displays or sets the time the switch waits for a reply from
an authentication server before it resends the request.
SYNTAX
auth timeout [timeout]
timeout - The time the switch waits for a reply from an
authentication server before it resends the request. (Range: 3-3600
seconds).
DEFAULT SETTING
15 seconds
EXAMPLE
Auth>timeout 10
Auth>
To Next Page
Loading...
Need help?
General