C
HAPTER
11
| Authentication Commands
– 230 –
EXAMPLE
Auth>client telnet radius enable
Auth>client
Client Configuration:
=====================
Client Authentication Method Local Authentication Fallback
------- ---------------------- -----------------------------
console local Disabled
telnet RADIUS Enabled
ssh local Disabled
web local Disabled
Auth>
auth statistics This command displays statistics for configured authentication and
accounting servers. The statistics map closely to those specified in
RFC4668 - RADIUS Authentication Client MIB.
SYNTAX
auth statistics
COMMAND USAGE
For a description of the items displayed, refer to “Displaying Statistics for
Configured Authentication Servers” on page 158.
EXAMPLE
Auth>statistics
Server #1 (0.0.0.0:1812) RADIUS Authentication Statistics:
Rx Access Accepts: 0 Tx Access Requests: 0
Rx Access Rejects: 0 Tx Access Retransmissions: 0
Rx Access Challenges: 0 Tx Pending Requests: 0
Rx Malformed Acc. Responses: 0 Tx Timeouts: 0
Rx Bad Authenticators: 0
Rx Unknown Types: 0
Rx Packets Dropped: 0
State: Disabled
Round-Trip Time: 0 ms
Server #1 (192.168.0.29:1813) RADIUS Accounting Statistics:
Rx Responses: 0 Tx Requests: 0
Rx Malformed Responses: 0 Tx Retransmissions: 0
Rx Bad Authenticators: 0 Tx Pending Requests: 0
Rx Unknown Types: 0 Tx Timeouts: 0
Rx Packets Dropped: 0
State: Ready
Round-Trip Time: 0 ms
Server #2 (0.0.0.0:1812) RADIUS Authentication Statistics:
Rx Access Accepts: 0 Tx Access Requests: 0
Rx Access Rejects: 0 Tx Access Retransmissions: 0
Rx Access Challenges: 0 Tx Pending Requests: 0
Rx Malformed Acc. Responses: 0 Tx Timeouts: 0
Rx Bad Authenticators: 0
Rx Unknown Types: 0
Rx Packets Dropped: 0
To Next Page
Loading...
