C
HAPTER
22
| QoS Commands
– 321 –
DEFAULT SETTING
Disabled
EXAMPLE
QoS>DSCP>remarking 9 enable
QoS>DSCP>
qos dscp queue
mapping
This command displays or sets the DSCP value used for DSCP remarking
for specified ports.
SYNTAX
qos dscp queue mapping [port-list] [class] [dscp]
port-list - A specific port or range of ports. (Range: 1-28, or all)
class - Output queue buffer. (Range: low/normal/medium/high or
1/2/3/4)
dscp - IPv4/IPv6 DSCP priority level.
(Options: 0/8/16/24/32/40/46/48/56)
DEFAULT SETTING
Low: 8
Normal: 16
Medium: 24
High: 32
EXAMPLE
QoS>DSCP>queue mapping 9 low 16
QoS>DSCP>
To Next Page
Loading...
Need help?
General