Edge-Core ES4528V-38 - Snmp Trap Inform Retry Times; Snmp Trap Inform Timeout

C HAPTER 26 | SNMP Commands
– 343 –
that critical information is received by the host. However, note that
informs consume more system resources because they must be kept in
memory until a response is received. Informs also add to network
traffic. You should consider these effects when deciding whether to
issue notifications as traps or informs.
EXAMPLE
SNMP/Trap/Inform>mode enable
SNMP/Trap/Inform>
snmp trap inform
timeout
This command displays or sets the SNMP trap inform timeout.
SYNTAX
snmp trap inform timeout [timeout]
timeout - The number of seconds to wait for an acknowledgment
before re-sending an inform message. (Range: 0-2147 seconds)
DEFAULT SETTING
1 second
EXAMPLE
SNMP/Trap/Inform>timeout 5
SNMP/Trap/Inform>
snmp trap inform
retry times
This command displays or sets the retry times for re-sending an SNMP trap
inform when the recipient does not acknowledge receipt.
SYNTAX
snmp trap inform retry times [retries]
retries - The maximum number of times to re-send an inform
message if the recipient does not acknowledge receipt. (Range: 0-
255)
DEFAULT SETTING
5
EXAMPLE
SNMP/Trap/Inform>retry times 1
SNMP/Trap/Inform>