C
HAPTER
26
| SNMP Commands
– 352 –
snmp view add This command adds or modifies an SNMPv3 view entry.
SYNTAX
snmp view add view-name [included | excluded] oid-subtree
view-name - The name of the SNMP view. (Range: 1-32 characters,
ASCII characters 33-126 only)
included | excluded - Indicates if the object identifier of a branch
within the MIB tree is included or excluded from the SNMP view.
Generally, if the view type of an entry is “excluded,” another entry
of view type “included” should exist and its OID subtree should
overlap the “excluded” view entry.
oid-subtree - Object identifiers of branches within the MIB tree.
Note that the first character must be a period (.). Wild cards can be
used to mask a specific portion of the OID string using an asterisk.
(Length: 1-128)
DEFAULT SETTING
None
COMMAND USAGE
SNMPv3 views are used to restrict user access to specified portions of the
MIB tree. The predefined view “default_view” includes access to the entire
MIB tree.
EXAMPLE
SNMP/View>add ifEntry.a included .1.3.5.1.2.1.2.2.1.1.*
SNMP/View>
snmp view delete This command deletes an SNMPv3 view entry.
SYNTAX
snmp view delete index
index - Index to SNMPv3 view table. (Range: 1-64)
DEFAULT SETTING
None
EXAMPLE
SNMP/View>lookup
Idx View Name View Type OID Subtree
--- -------------------------------- --------- ---------------------------
1 default_view included .1
2 ifEntry.a included .1.3.5.1.2.1.2.2.1.1.*
Number of entries: 2
To Next Page
Loading...
Need help?
General