Edge-Core ES4528V-38 - 30 DHCP Commands

– 367 –
30 DHCP COMMANDS
This section describes commands used to configure DHCP Relay and Option
82 Information.
dhcp relay
configuration
This command displays DHCP relay configuration settings.
SYNTAX
dhcp relay configuration
EXAMPLE
DHCP/Relay>configuration
DHCP Relay Mode : Disabled
DHCP Relay Server : NULL
DHCP Relay Information Mode : Disabled
DHCP Relay Information Policy : replace
DHCP/Relay>
dhcp relay mode This command displays or sets DHCP relay operational mode.
SYNTAX
dhcp relay mode [enable | disable]
enable - Enables the DHCP relay function.
disable - Disables the DHCP relay function.
DEFAULT SETTING
Disabled
Table 45: DHCP Commands
Command Function
dhcp relay configuration Displays DHCP relay configuration settings
dhcp relay mode Displays or sets DHCP relay operational mode
dhcp relay server Displays or sets the IP address of the DHCP relay server
dhcp relay information
mode
Displays or sets the DHCP Relay Option 82 mode
dhcp relay information
policy
Displays or sets the DHCP relay policy for DHCP client packets
that include Option 82 information
dhcp relay statistics Displays or clears DHCP relay statistics