Edge-Core ES4528V-38 - Acl Delete; Acl Lookup

C HAPTER 23 | ACL Commands
– 329 –
COMMAND USAGE
Rules within an ACL are checked in the configured order, from top to
bottom. A packet will be accepted as soon as it matches a permit rule, or
dropped as soon as it matches a deny rule. If no rules match, the frame is
accepted.
EXAMPLE
ACL>add port 9 etype any
ACE ID 31 added last
ACL>
acl delete This command deletes an access control entry.
SYNTAX
acl delete ace-id
ace-id - An ACL entry. (Range: 1-128)
DEFAULT SETTING
None
EXAMPLE
ACL>delete 9
ACL>
acl lookup This command displays the specified access control entry.
SYNTAX
acl lookup [ace-id]
ace-id - An ACL entry. (Range: 1-128)
DEFAULT SETTING
Displays all ACEs.
EXAMPLE
ACL>lookup 1
ACE ID : 1 Rate Limiter: Disabled
Ingress Port: Port 9 Port Copy : Disabled
Type : User Logging : Disabled
Frame Type : Any Shutdown : Disabled
Action : Permit Counter : 0
MAC Parameters VLAN Parameters
-------------- ---------------
DMAC Type : Any VLAN ID : Any