Edge-Core ES4528V-38 - Igmp Groups; Igmp Status

C HAPTER 17 | IGMP Commands
– 285 –
EXAMPLE
IGMP>flooding enable
IGMP>
igmp groups This command displays active IGMP groups.
SYNTAX
igmp groups [vlan-id]
vlan-id - VLAN identifier. (Range: 1-4095)
DEFAULT SETTING
Displays groups for all VLANs.
EXAMPLE
IGMP>groups
VID Group Ports
---- --------------- -----
1 239.255.255.250 1,2
IGMP>
igmp status This command displays IGMP querier status and protocol statistics.
SYNTAX
igmp status [vlan-id]
vlan-id - VLAN to which the management address is assigned.
(Range: 1-4095)
DEFAULT SETTING
Displays status for all VLANs.
COMMAND USAGE
For a description of the information displayed by this command, see
“Showing IGMP Snooping Information” on page 175.
EXAMPLE
IGMP>status
Querier Rx Tx Rx Rx Rx Rx
VID Status Queries Queries V1 Reports V2 Reports V3 Reports V2 Leave
---- ------ ---------- ---------- ---------- ---------- ---------- ----------
1 ACTIVE 0 64 0 149 0 0
2 ACTIVE 0 64 0 0 0 0
IGMP>