Edge-Core ES4528V-38 - Mac Dump

C HAPTER 19 | MAC Commands
– 298 –
DEFAULT SETTING
Auto
COMMAND USAGE
Make sure that the link used for managing the switch is added to the Static
MAC Table before changing to secure learning mode. Otherwise the
management link will be lost, and can only be restored by using another
non-secure port or by connecting to the switch via the serial interface.
N OTE : If another software module is in control of the learning mode for a
given port, it cannot be changed by this command. An example of such a
module is the MAC-Based Authentication under 802.1X.
EXAMPLE
MAC>learning 9 secure
MAC>
mac dump This command displays sorted list of MAC address entries.
SYNTAX
mac dump [mac-max] [mac-addr] [vlan-id]
mac-max - Maximum number of MAC addresses to display.
mac-addr - First MAC address to display.
(Format: xx-xx-xx-xx-xx-xx)
vlan-id - VLAN identifier. (Range: 1-4095)
DEFAULT SETTING
Maximum: Displays all addresses.
First address: MAC address zero
VLAN ID: 1
EXAMPLE
MAC>dump 5
Type VID MAC Address Ports
------ --- ----------------- -----
Static 1 00-01-c1-00-00-e1 None,CPU
Dynamic 1 00-12-cf-61-24-2f 7,8
Dynamic 1 00-12-cf-61-24-30 7,8
Dynamic 1 00-30-fc-12-34-56 4,5
Dynamic 1 00-30-fc-12-34-57 4,5
MAC>