C
HAPTER
29
| UPnP Commands
– 365 –
upnp advertising
duration
This command displays or sets the advertising duration of UPnP messages.
SYNTAX
upnp advertising duration [duration]
duration - The duration, carried in Simple Service Discover Protocol
(SSDP) packets, which informs a control point or control points how
often it or they should receive a SSDP advertisement message from
this switch. Due to the unreliable nature of UDP, the switch sends
SSDP messages periodically at the interval one-half of the
advertising duration minus 30 seconds. (Range: 100-86400
seconds)
DEFAULT SETTING
100 seconds
EXAMPLE
UPnP>advertising duration
UPnP>
To Next Page
Loading...
