Edge-Core ES4528V-38 User Manual

C HAPTER 4 | Configuring the Switch
Configuring Authentication for Management Access and 802.1X
– 68 –
WEB INTERFACE
To configure authentication for management access in the web interface:
1. Click Configuration, Authentication.
2. Configure the authentication method for management client types, the
common server timing parameters, and address, UDP port, and secret
key for each required RADIUS or TACACS+ server.
3. Click Save.
Figure 9: Authentication Configuration

Edge-Core ES4528V-38 Specifications

General

Uplink Ports	4 x 1G/10G SFP+
Switching Capacity	128 Gbps
MAC Address Table Size	16K
VLANs	4K
Ports	24 x 10/100/1000BASE-T
Forwarding Rate	95.2 Mpps
Jumbo Frames	9K Bytes
Management	CLI, Web, SNMP
Power Supply	100~240VAC, 50-60Hz, Internal
Operating Temperature	0°C to 50°C (32°F to 122°F)
Dimensions (W x D x H)	440 x 44 mm
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p
Model	Edge-Core ES4528V-38