Edge-Core ES4528V-38 - Snmp Access Delete; Snmp Access Lookup

C HAPTER 26 | SNMP Commands
– 354 –
DEFAULT SETTING
Security model: any
Security level: noAuthNoPriv
COMMAND USAGE
Use this command to assign portions of the MIB tree to which each
SNMPv3 group is granted access. You can assign more than one view to a
group to specify access to different portions of the MIB tree.
EXAMPLE
SNMP/Access>add r&d usm authpriv default_view ifEntry.a
SNMP/Access>
snmp access delete This command deletes an SNMPv3 access entry.
SYNTAX
snmp access delete index
index - Index to SNMPv3 access table. (Range: 1-64)
DEFAULT SETTING
None
EXAMPLE
SNMP/Access>lookup
Idx Group Name Model Level
--- -------------------------------- ----- --------------
1 default_ro_group any NoAuth, NoPriv
2 default_rw_group any NoAuth, NoPriv
3 r&d usm Auth, Priv
Number of entries: 3
SNMP/Access>delete 3
SNMP/Access>
snmp access
lookup
This command displays SNMPv3 access entries.
SYNTAX
snmp access lookup [index]
index - Index to SNMPv3 access table. (Range: 1-64)
DEFAULT SETTING
Displays all entries.