C
HAPTER
12
| Port Commands
– 234 –
EXAMPLE
Port>configuration
Port State Mode Flow Control MaxFrame Power Excessive Link
---- -------- ------ ------------ -------- -------- --------- ----
1 Enabled Auto Disabled 9600 Disabled Discard 100fdx
2 Enabled Auto Disabled 9600 Disabled Discard 100fdx
3 Enabled 1Gfdx Disabled 9600 Disabled Discard Down
4 Enabled Auto Disabled 9600 Disabled Discard Down
5 Enabled Auto Disabled 9600 Disabled Discard Down
6 Enabled Auto Disabled 9600 Disabled Discard Down
7 Enabled Auto Disabled 9600 Disabled Discard Down
8 Enabled Auto Disabled 9600 Disabled Discard Down
9 Enabled Auto Disabled 9600 Disabled Discard Down
10 Enabled Auto Disabled 9600 Disabled Discard Down
11 Enabled Auto Disabled 9600 Disabled Discard Down
12 Enabled Auto Disabled 9600 Disabled Discard Down
13 Enabled Auto Disabled 9600 Disabled Discard Down
14 Enabled Auto Disabled 9600 Disabled Discard Down
15 Enabled Auto Disabled 9600 Disabled Discard Down
16 Enabled Auto Disabled 9600 Disabled Discard Down
17 Enabled Auto Disabled 9600 Disabled Discard Down
18 Enabled Auto Disabled 9600 Disabled Discard Down
19 Enabled Auto Disabled 9600 Disabled Discard Down
20 Enabled Auto Disabled 9600 Disabled Discard Down
21 Enabled Auto Disabled 9600 Disabled Discard Down
22 Enabled Auto Disabled 9600 Disabled Discard Down
23 Enabled Auto Disabled 9600 Disabled Discard Down
24 Enabled Auto Disabled 9600 Disabled Discard Down
25 Enabled Auto Disabled 9600 Disabled Discard Down
26 Enabled Auto Disabled 9600 Disabled Discard Down
27 Enabled Auto Disabled 9600 Disabled Discard Down
28 Enabled Auto Disabled 9600 Disabled Discard Down
Port>
Flow Control Flow control mode (Enabled or Disabled)
MaxFrame Maximum frame size
Power Power saving mode (Enabled or Disabled)
Excessive Response to take when excessive transmit collisions are detected on
a port (Discard frame or Restart backoff algorithm)
Link Link status (connection speed/duplex mode or down)
Table 20: Port Configuration (Continued)
Field Description
To Next Page
Loading...
