Edge-Core ES4528V-38 - Page 372

C HAPTER 31 | Firmware Commands
– 372 –
EXAMPLE
Firmware>load 192.168.2.19 ES4528V-0_7_smbstax_estax_34.dat
Downloaded "ES4528V-0_7_smbstax_estax_34.dat", 1812567 bytes
Master initiated software updating starting
Waiting for firmware update to complete
Transferred image to switch 1
All switches confirmed reception, programming
Starting flash update - do not power off device!
Erasing image...
Programming image...
... Erase from 0x807e0000-0x807effff: .
... Program from 0x01ff0000-0x02000000 to 0x807e0000: .
... Program from 0x01ff000a-0x01ff000c to 0x807e000a: .
Flash update succeeded.
+
RedBoot(tm) bootstrap and debug environment [ROMRAM]
Non-certified release, version 1_12 - built 10:20:10, Jul 6 2009
Copyright (C) 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Free Software Foundation, Inc.
RedBoot is free software, covered by the eCos license, derived from the
GNU General Public License. You are welcome to change it and/or distribute
copies of it under certain conditions. Under the license terms, RedBoot's
source code and full license terms must have been made available to you.
Redboot comes with ABSOLUTELY NO WARRANTY.
Platform: VCOREII system (ARM9) @178MHz
RAM: 0x00000000-0x02000000 [0x0002c348-0x01fe1000 available]
FLASH: 0x80000000-0x807fffff, 128 x 0x10000 blocks
== Executing boot script in 3.000 seconds - enter ^C to abort
RedBoot> led_set -g
RedBoot> diag -d -m -h
Memory BIST: Running... Done
DDR SDRAM: Testing [0x0002c348-0x01fe1000]... Done
H/W specific tests: Running... Done
RedBoot> led_set -g
RedBoot> fis load -a managed
Image loaded from 0x00100000-0x00445a9c
RedBoot> go
Username: