OPERATOR’S MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
3. Enter the flight level in the scratchpad, e.g. 100, and then press LSK 1L.
4. Enter the wind direction and speed at LSK 4R, e.g. 090/70.
5. Repeat the procedure for up to 4 winds. Press the EXEC key to complete the wind entry.
NOTE The first wind entry is displayed on line 4.
Upon entry of subsequent flight level, the entries get re-ordered by decreasing flight level from line 1 to
line 4.
MOD CAFTA WIND 2/17
ALT DIR/SPD
FL
---
FL100 000
T
/ 0
<ERASE LEGS WIND>
ACT CAFTA WIND 2/17
ALT DIR/SPD
FL
200 140
T
/ 3 0
FL
150 135
T
/ 40
FL125 100
T
/ 50
FL100 090
T
/ 70
LEGS WIND>
NOTE: A wind entry at a given flight level is propagated forward at the same flight level to the end of the route,
or until the occurrence of the next forecast wind at the same flight level.
6. Use the NEXT key to advance to the next waypoint, e.g. page 2/5 YZP. Repeat the DIR/SPD entry
procedure if a change of wind is predicted at the specified flight level.
NOTE: The wind entry is shown in a large font size at the page where first entered. The propagated winds on
other pages are shown in normal font size.
Page 5-15
August 17, 2010
To Next Page
Loading...