Esterline CMA-9000

To Next Page

To Previous Page

OPERATOR’S MANUAL

CMA-9000 FLIGHT MANAGEMENT SYSTEM

Page A-68

August 17, 2010

C. Inactive route page before editing:

D. Inactive route during modification:

VIA [1L to 5L]: Via lines:

• Valid entries are DIRECT or an airway identifier only.

• Procedure names automatically appear when selected on the DEPARTURE or ARRIVAL pages.

• Defaults to direct if no entry is made.

• Entry of an airway with the previous or next TO entry not on that airway is invalid.

• Entry of an airway on the first via line initiates an airway intercept. Boxes will appear in the first TO line;

• Entering a waypoint in the boxes will cause the first VIA line to be dashed, and pushes the airway and TO

waypoint down to the next line. The first fix on the airway that is closest to being abeam of the aircraft is

displayed on the first TO line.

• Subsequent entry of an airway determines the intersection waypoint.

• If the waypoint is unnamed, a waypoint is created in latitude/longitude, identified by an X followed by the

entered airway name (e.g. XJ532).

RTE 2 2/3

VIA TO

LACRE3 HUMPP

DIRECT RADDT

J20 OCS

J154 RAMMS

DIRECT GWENS

RTE 2