OPERATOR’S MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
Page A-79
August 17, 2010
C. Normal ACTIVE format:
WAYPOINT IDENTIFIER (1L,2L,3L,4L,5L): Displays the same identifiers as on the corresponding RTE LEGS
Y/X page.
LEGS WIND [6L]: Access to the corresponding RTE LEGS WIND Y/X page.
ERASE [6L]: Erase route modifications.
RESTORE [6L]: Displayed only if the RTE was erased on the RTE 1/X page. Used to restore the active route.
CANCEL [6L]: Cancel the changes made to the inactive route.
RNP (1R, 2R, 3R, 4R, 5R): Displays leg’s RNP value extracted from the database.
NOTE: The RNP value will only be displayed if there is an RNP value defined for this leg in the Navigation
Database.
LAT-LONG (1R, 2R, 3R, 4R, 5R): Display position of the waypoint identified on the previous line.
LEGS [6R]: Returns to the corresponding RTE LEGS Y/X page.
CONFIRM [6R]: Confirm the changes made to the inactive route.
NOTE: Flight plan waypoint modifications are not permitted on the LEGS POS page.
ACT RTE 1 LEGS POS 1/2
CAFTA RNP 1.00NM .
N51
o
17.72 W129
o
05.32
YZP RNP 1.00NM
N53
o
15.13 W131
o
48.42
MOCA1
N54
o
30.18 W133
o
01.90
BKA
N56
o
51.57 W135
o
33.08
KILLA
N58
o
44.98 W140
o
35.10
<LEGS WIND LEGS>
To Next Page
Loading...