OPERATOR’S MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
CLIMB [6L]:
CRUISE [6L]:
DESCENT[ 6L]:
APPROACH[ 6L]:
ERASE [6L]:
"ERASE" is only displayed when an active flight plan modification is in progress. Pressing this key will undo all
changes to the active flight plan and return to the ACT Route status.
"CLIMB", "CRUISE", "DESCENT" or "APPROACH" enables direct access to the page.
VERTICAL PATH ANGLE [1R to 5R]: Displays the required average Vertical Path Angle (VPA), in degrees,
inbound to each climb/descent/approach waypoint on the title fields.
Valid data is displayed in small white font. Value that exceeds the aircraft vertical performances envelope limits
is displayed in small amber font.
WAYPOINT SPEED/ALTITUDE [1R to 5R]: Displays the predicted target speeds/crossing altitudes or
speeds/altitudes constraints.
Pressing the LSK toggles the display between target speeds/crossing altitudes and speeds/altitudes constraints
(similar to the LEGS page) when an arrow is displayed in column 24.
Speed/Altitude constraint is displayed in same color and font as on the LEGS page. Valid speed/crossing
altitude is displayed in small white font. Temperature-compensated altitude is displayed in reverse video. Value
that exceeds the aircraft vertical performance envelope limits is displayed in amber color.
If an altitude constraint generates a climb in descent, that altitude constraint is displayed in amber.
A green prompt is displayed in column 24 when a speed or altitude constraint can be achieved. When either is
unachievable an amber prompt is displayed instead.
DES FORECAST [6R]: Enables direct access to the DES FORECAST 1/2 page.
Page RRJ-A-43
August 17, 2010