OPERATOR’S MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
RTA WPT [1L]: Entry and display of the RTA waypoint identifier.
Manual entry is allowed when:
• the active or modified route is displayed; AND
• the waypoint is in the displayed (e.g. mod or active) route; AND
• no engine-out mode is active; AND
• VNAV descent mode is not active.
Deletion of a manual entry is allowed.
Manual entry is displayed in large white font. The data field displays dashes when:
• no RTA waypoint is entered; OR
• the RTA waypoint is sequenced; OR
• the RTA waypoint has been removed from the route.
RTA CRZ SPD [2L]: Displays the required cruise target speed to reach the RTA WPT [1L] at the RTA [1R]
time.
Computed values are displayed in small white font when the current VNAV mode is Takeoff, Climb or Cruise.
The data field is blank when the MOD route is currently being displayed, the current VNAV mode is
Descent/Approach or the aircraft is flying a holding pattern or an engine-out cruise procedure.
The title and data field are blank when RTA WPT [1L] displays dashes.
REC T/O [3L]: Displays the recommended takeoff time to meet the planned RTA [1R] time.
The recommended takeoff time is the time the aircraft should depart in order to arrive at the RTA WPT [1L] on
time.
"NOW" is displayed when the recommended takeoff time is passed. The title and data field are blank when:
• RTA WPT [1L] displays dashes; OR
• RTA [1R] time is not achievable; OR
• No RTA is displayed in [1R]; OR
• the aircraft is in the air.
- TO WINDOW - [5L]-[5R]:
- RTA WINDOW - [5L]-[5R]:
Displays:
• "- TO WINDOW -" while on ground ("TO" means Take Off); OR
• "- RTA WINDOW -" while in the air.
The title and data field are blank when:
• the aircraft is in the air and RTA WPT[1L] displays dashes; OR
• the aircraft is on ground and the RTA WPT[1L] or the RTA[1R] displays dashes or blanks; OR
• the aircraft is in descent; OR
• the aircraft is flying a holding pattern. OR
• the aircraft is flying a cruise engine out procedure.
Page RRJ-A-54
August 17, 2010
To Next Page
Loading...