OPERATOR’S MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
DATA ENTRY
ADVISORY
MESSAGE
DESCRIPTION ACTION
!SELECT
TRANS/APPR/RWY
Selection of the STAR transition or
approach or runway is required before the
STAR waypoints can be loaded into a route
from the navigation database.
Select STAR transition, approach, or
runway as appropriate.
!SELECT
TRANS/RUNWAY
Selection of the SID transition or runway is
required before the SID waypoints can be
loaded in route from the navigation
database.
Select SID transition or runway as
appropriate.
!TEMP DATABASE
FULL
Temporary database is full (99 waypoints or
50 waypoints with the first three letters are
different).
Use existing temporary waypoints or reload
the custom route (for waypoints not in
Navigation database).
!UNABLE FMS-FMS
SYNC
In a dual/triple-FMS installation, attempt to
synchronize FMSs failed because of an
inter-FMS communication failure.
Any automatically synchronized item listed
in Section 3, dual/triple-FMS Operations,
must be now performed independently on
each FMS.
Refer to MESSAGE RECALL and/or MAINT
MESSAGE page(s) for more details.
Advise maintenance.
!USER ROUTE EXISTS
The entered user route name is the same
as an existing user route.
Enter a different user route name.
!USER WPT LIST FULL
Attempt to add a new waypoint whilst the
FMS list is full (450 fixed and 10 moving
waypoints).
Cancel entry or delete unnecessary
waypoints to make room for the new one(s).
!WAIT
Custom Route load in process. Wait until the FMS has completed loading
of the custom route.
!WPT NOT IN AIRWAY
On RTE page, waypoint entered in TO-field
of a pending airway is not found on this
airway.
Enter proper waypoint in TO-field of
pending airway.
Page E-22
August 17, 2010
To Next Page
Loading...