Chapter 4 Function/System Settings and Display
4.2 Advanced Copy Management > show advanced-copy-sessions
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED P2X0-1030-09ENZ0
402
all All sessions for all the types are displayed.
ec All EC sessions are displayed.
opc All OPC sessions are displayed.
qopc All QuickOPC sessions are displayed.
sopc All SnapOPC sessions are displayed.
sopc+ All SnapOPC+ sessions are displayed.
mon All Monitor sessions are displayed.
rec All REC sessions are displayed.
xcopy All XCopy sessions are displayed.
odx All ODX copy sessions are displayed.
-requestor Optional. This parameter specifies the requester that is to be used to narrow down the
sessions. If omitted, this parameter is handled as though "-requestor all" is specified.
• This parameter can be specified with the "-requestor" and "-volume-type" parameters.
• The "-session-id" parameter cannot be specified with this parameter.
all Sessions to be displayed are not restricted by the requesters. If omitted, this
operand is assigned.
gui Only sessions being started from GUI are displayed.
cli Only sessions being started from CLI are displayed.
guicli Only sessions being started from both GUI and CLI are displayed.
smis Only sessions being started from SMI-S are displayed.
scsi Only sessions being started from SCSI are displayed.
lan Only sessions being started from Software via LAN except from
SMI-S are displayed.
-volume-type
Optional. This parameter specifies the type of volume that is to be used to narrow down the
sessions. If omitted, this parameter is handled as though "-volume-type all" is specified.
• This parameter must be specified with the "-type" parameter.
• The "-requestor" parameter can be specified with this parameter.
• The "-session-id" parameter cannot be specified with this parameter.
all Sessions to be displayed are not restricted by the volume type. If omitted, this
operand is assigned.
standard Only sessions associated with the Standard volume type are displayed.
open Same as "standard".