Optimizing the Image
5-58 LOGIQ 7 Online Help
Direction 2392536-100 Rev. 1
Exporting Traces (Saving the Trace Data)
You can save the trace data to an external file.
1. Select Export Traces to save the trace data.
OR
Position the cursor to the Analysis window and press the left
Set key. The system menu displays. Select Export traces.
2. The folloiwng window displays.
Figure 5-30. Export Trace Window
• Location : Select Location which to save.
• Filename : Enter the filename. (Only Text)
• Comment : Enter the comment if necessary.
3. Select OK to save the data and return to the TIC Analyisis
screen.
• All displayed ROI traces are saved in the exported file.
• The fit parameters are included in the trace file if the
user has done a curve fit.
NOTE: The Smoothed trace is the one saved is the user has applied a
smoothing filter.
NOTE: Only data from the user selected image range is included in the
exported trace file.
NOTE: Data for disabled frames are not be included in the exported
trace file.
NOTE: No TIC trace results are saved in the standard image database.
NOTE: TIC trace results are now shown on the Worksheet.
To Next Page
Loading...
