OB/GYN
9-32 LOGIQ 7 Basic User Manual
Direction 2392206-100 Rev. 1
Thorax Transverse Diameter
To measure thorax transverse diameter, make one distance
measurement:
1. Select ThD; an active caliper displays.
2. To position the active caliper at the start point, move the
Trackball.
3. To fix the start point, press Set.
The system fixes the first caliper and displays a second
active caliper.
4. To position the second active caliper at the end point, move
the Trackball.
A dotted line connects the measurement points.
5. To complete the measurement, press Set.
The system displays the thorax transverse diameter in the
Results Window.
USA
Europe
Tokyo
Osaka
ASUM