GE LOGIQ 7

OB Measurements and Calculations
LOGIQ 7 Basic User Manual 9-41
Direction 2392206-100 Rev. 1
Patient data
The Patient data section, at the top of the worksheet, lists
information from the Patient Data Entry screen.
You can select the following fields:
• FetusNo – if this is a multi-gestational patient, you can
select the fetus in this field. You can also adjust the Fetus
knob to select the fetus.
• CUA/AUA – select the ultrasound age calculation method
• Composite Ultrasound Age (CUA) – regression
calculation
• Average Ultrasound Age (AUA) – an arithmetic average
You can select the method in this field, or adjust the Select
CUA/AUA knob.
You can enter information in the following fields:
• FetusPos – type information about the fetus position.
• PLAC – type information about the placenta.