OB/GYN
9-54 LOGIQ 7 Basic User Manual
Direction 2392206-100 Rev. 1
Fetal Growth Curve Graph (continued)
To change
measurements in
quad view
When you view four graphs simultaneously, you can select
which four you want to see. To change each graph in quad view:
1. On the graph display, use the Trackball to move the cursor
to the small box that is upper left of each graph, then press
Set.
The system displays a list of measurements.
2. Move the Trackball to select the desired measurement and
press Set.
The system displays the Fetal Growth Curve Graph for the
selected measurement.
To scroll through all Fetal Growth Curve Graphs, adjust the
Graph Change knob.
The order of a quad graph view can be saved by selecting Save.