OB/GYN
9-80 LOGIQ 7 Basic User Manual
Direction 2392206-100 Rev. 1
Fetal Age Table (continued)
Complete the field 1. Input value to Min, Max and Interval of the Parameters field.
The system automatically fills in the MEAS column.
Input value to the columns of MEAN and SD.
NOTE: To move between the fields in the table, use the up, down,
left, and right arrow keys.
NOTE: You must enter a minimum of two rows of data. Any lines
with a blank cell are not saved.
To save the Table Data, move the Trackball to Exit to Save
and press Set. If you want cancel this table, move the
Trackball to Cancel and press Set.
To Next Page
Loading...
