GE LOGIQ 7

Cardiology
10-16 LOGIQ 7 Basic User Manual
Direction 2392206-100 Rev. 1
Left Ventricle (continued)
One trace
measurements
• Left Ventricle Outflow Tract Area (LVOT Diam)
• Left Ventricle Area, Two Chamber
• Diastolic (LVA (d))
• Systolic (LVA (s))
• Left Ventricle Area, Four Chamber
• Diastolic (LVA (d))
• Systolic (LVA (s))
• Left Ventricle Area, Short Axis
• Diastolic (LVA (d))
• Systolic (LVA (s))
• Left Ventricle Endocardial Area, Width (LVA (d))
• Left Ventricle Epicardial Area, Length
• Diastolic (LVAepi (d))
• Systolic (LVAepi (s))
Making a trace
measurement
1. Select the measurement; an active caliper displays.
2. To position the caliper at the start point, move the Trackball.
3. To fix the trace start point, press Set.
The system displays a vertical dotted line.
4. To trace the measurement area, move the Trackball.
A line shows the traced area.
5. To complete the measurement, press Set.
The system displays the measurement in the Results
Window.