Cardiology Measurements
LOGIQ 7 Basic User Manual 10-23
Direction 2392206-100 Rev. 1
Right Atrium (continued)
One trace
measurements
• Right Atrium Area (RA Area)
• Right Atrium Volume, SIngle Plane, Method of Disk (RAAd)
• Right Atrium Volume, Systolic, SIngle Plane, Method of Disk
(RAAs)
Making a trace
measurement
1. Select the measurement; an active caliper displays.
2. To position the caliper at the start point, move the Trackball.
3. To fix the trace start point, press Set.
The system displays a vertical dotted line.
4. To trace the measurement area, move the Trackball.
A line shows the traced area.
5. To complete the measurement, press Set.
The system displays the measurement in the Results
Window.
To Next Page
Loading...
Need help?
General
