Cardiology
10-24 LOGIQ 7 Basic User Manual
Direction 2392206-100 Rev. 1
Right Ventricle
The following are cardiac B-Mode Right Ventricle
measurements:
One trace
measurement
• Left Pulmonary Artery Area (LPA Area)
• Right Pulmonary Artery Area (RPA Area)
Making a trace
measurement
1. Select the measurement; an active caliper displays.
2. To position the caliper at the start point, move the Trackball.
3. To fix the trace start point, press Set.
The system displays a vertical dotted line.
4. To trace the measurement area, move the Trackball.
A line shows the traced area.
5. To complete the measurement, press Set.
The system displays the measurement in the Results
Window.
To Next Page
Loading...
