Stress Echo
LOGIQ 7 Basic User Manual 10-109
Direction 2392206-100 Rev. 1
Manual selection
of images from
Analysis screen
1. When currently in the protocol analysis screen in the Stress
analysis quad screen, hold down the SHIFT key while
performing Steps 2 through 4.
2. Use the Trackball to move the cursor to the first image to
select in the template matrix.
3. Press Set. The frame of the selected loop is in the Stress
analysis screen and the next window in the quad screen is
automatically selected.
4. Repeat step 2 and 3 to select other images.
5. Depress SHIFT .
Manual selection
of images in the
Protocol screen
1. In a stress examination, press Protocol. A preview of the
acquisition displays.
2. Use the Trackball to move the cursor to the first image to
select.
3. Press Set. The frame of the selected loop highlights.
4. Repeat Steps 2 and 3 to select other images.
5. Press Analyze to open images in the Analysis screen.
To Next Page
Loading...
Need help?
General
