Cardiology
10-116 LOGIQ 7 Basic User Manual
Direction 2392206-100 Rev. 1
Editing/Creating a
template
(continued)
Configuring levels The following options can be set up for each level:
Number of cycles to be stored in the cine loop:
1. Enter the desired number in the Cycles field. Up to four
cycles/cine loop can be stored.
Continuous Capture
1. Check Continuous Capture if continuous image acquisition
throughout the level is desired.
When Continuous Capture is selected, preview of the cine
loop and reference display during acquisition are not
possible.
Preview of store
1. Check Preview of store if review and adjustment of cine
loops before storage is desired.
Show reference
1. Check Show reference if the display of the corresponding
reference loop is desired during acquisition (Dual screen
mode).
To Next Page
Loading...
Need help?
General
