Stress Echo
LOGIQ 7 Basic User Manual 10-117
Direction 2392206-100 Rev. 1
Adding a group 1. In the Protocol template preview field, select the cells to be
part of the group.
2. In the Pre-defined group field, press New group.
A dialogue box displays to ask the user to enter a name for
the new group.
3. Enter the group name.
4. Press OK. The new group displays in the pre-defined group
field.
Updating an
existing group
1. In the Pre-defined group field, select the group to edit.
The selected cells are highlighted in the Protocol template
preview field.
NOTE: A selected group is highlighted by a blue frame.
2. Either select a new cell(s) to add to the group or deselect an
existing cell(s) to remove from the group.
3. Press Update group.
The display in the Protocol template preview field is updated
accordingly.
Deleting a group 1. In the Pre-defined group field, select the group to delete.
NOTE: The selected group is highlighted by a blue frame.
2. Press Delete group.
The group is removed from the list in the pre-defined group
field.
To Next Page
Loading...
Need help?
General
