Image/Data Management
LOGIQ 7 Basic User Manual 15-19
Direction 2392206-100 Rev. 1
Query/Retrieve (Search and retrieve the data from DICOM device)
Query 1. Press Patient and select Exam Data Transfer. The Exam
Data Transfer screen displays.
2. Select Q/R. The patient/exam list in the Local Archive
displays in the Transfer To section.
NOTE: Only “Local Archive - Int.HD” is enabled for Transfer To.
3. Select the Query/Retrieve server from the Transfer From
pull-down menu.
NOTE: The server is configured in the Utility screen. Multiple
servers are able to be configured.
4. Press Query in the Transfer From section. The Query is
performed.
5. The server’s patient list displays.
NOTE: Press Query again to refresh the list.
Retrieve 1. Select the patient(s) or the exam(s) to be retrieved from the
patient list.
2. Press Transfer. Retrieve the data from the Query/Retrieve
Server. The progress bar displays during the transfer.
To Next Page
Loading...
Need help?
General
