Recording Images
15-20 LOGIQ 7 Basic User Manual
Direction 2392206-100 Rev. 1
Worklist (Search and retrieve the Patient/Exam information)
1. Press Patient and select Exam Data Transfer. The Exam
Data Transfer screen displays.
2. Select Worklist. The patient/exam list in the Local Archive
displays in the Transfer To section.
NOTE: Only “Local Archive - Int.HD” is enabled for Transfer To.
3. The Worklist used last time is displayed on the monitor
display. Press Refresh to refresh the list or select another
Worklist server from the Transfer From pull-down menu.
NOTE: The worklist server is configured in the Utility screen.
Multiple servers are able to be configured.
NOTE: You can configure whether the auto-refresh worklist has
been enabled/disabled in the Utility screen. The system
automatically refreshes the list when the exam data transfer
accesses the Worklist server or changes the Worklist
server.
4. Select the patient(s) or the exam(s) from the list.
5. Press Transfer. The progress bar displays during the
transfer.
To Next Page
Loading...
Need help?
General
