Image/Data Management
LOGIQ 7 Basic User Manual 15-21
Direction 2392206-100 Rev. 1
MPEGvue (Save the data to CD-R to see on the PC)
You can see the exam data on the PC by using MPEGvue.
1. Format the removable media. Label the removable media.
Answer Yes/OK to the messages.
2. Press Patient and select Exam Data Transfer. The Exam
Data Transfer screen displays.
3. Select MPEGvue. The Patient list which has image in the
Local Archive is displayed in the Transfer From section.
NOTE: Only “Local Archive - Int.HD” is enabled for the Transfer
From.
4. Select the CD-R from the Transfer To pull-down menu.
5. Select the patient(s) or the exam(s) from the list.
NOTE: If you press Clear in the Transfer From and Transfer To
section, all the search criteria clears and the list is refreshed
accordingly.
6. Press Transfer. The progress bar is displayed during the
transfer.
To Next Page
Loading...
Need help?
General
