Customizing Your System
16-36 LOGIQ 7 Basic User Manual
Direction 2392206-100 Rev. 1
Restore procedure: user-defined configurations
1. Insert the CD with the user-defined configurations into the
CD-RW drive.
2. On the Touch Panel, press Utility.
3. On the Utility Touch Panel, press System.
4. On the monitor display, select Backup/Restore.
The Backup/Restore screen is displayed.
NOTE: If you are not logged in with administrator privileges, the
Operator Login window is displayed. Log on with
administrator privileges.
5. In the Restore list, select from the following, depending on
which configurations you want to restore:
• User Defined Configuration,
OR, in the Detailed Restore section select one of the
following:
• Imaging Presets
• Connectivity Configuration
• Measurement Configuration
• Comment/Body Pattern Configuration
• All Others
6. In the Media field, select the system and user-defined
configurations CD.
7. Select Restore.
The system performs the restore. As it proceeds, status
information is displayed on the System/Backup/Restore
screen.
CAUTION
The restore procedure overwrites the existing database on the
local hard drive. Make sure to insert the correct CD-ROM/
MOD.
CAUTION
To avoid the risk of overwriting the local patient and report
archives, DO NOT check Patient Archive when restoring user-
defined configurations.
To Next Page
Loading...
Need help?
General
