System Presets
LOGIQ 7 Basic User Manual 16-35
Direction 2392206-100 Rev. 1
Backup procedure: user-defined configurations
1. Insert a formatted CD into the CD-RW drive.
NOTE: For information about formatting a disk, See ‘Formatting
removable media’ for more information.
2. On the Touch Panel, press Utility.
3. On the Utility Touch Panel, press System.
4. On the monitor display, select Backup/Restore.
The Backup/Restore screen is displayed.
NOTE: If you are not logged in with administrator privileges, the
Operator Login window is displayed. Log on with
administrator privileges.
5. In the Backup list, select User Defined Configuration.
6. In the Media field, select CD.
7. Select Backup.
The system performs the backup. As it proceeds, status
information is displayed on the Backup/Restore screen.
8. After the backup is complete, press F3 to eject the CD.
CAUTION
To avoid the risk of overwriting the local patient and report
archives on the system to update, DO NOT check Patient
Archive when making a backup of configuration settings.
To Next Page
Loading...
Need help?
General
