Annotations Libraries Presets
LOGIQ 7 Basic User Manual 16-51
Direction 2392206-100 Rev. 1
Deleting a user defined library
1. Select the library name which you want to delete from the
pull-down menu.
2. Press Delete.
3. Press Save to save the changes.
Creating a small list
A small list is a list of up to three annotations attached to one
annotation location on the Touch Panel. You can use a small list
to group similar annotations, such as those indicating a probe
location. For example, you can specify that a small list include
the following annotations: Long, Transverse, and Coronal. To
make annotations easier to use, you can define the small list in
the same location in each annotation library.
To define a small list:
1. Move the Trackball to the annotation field on Page1 or
Page2 where you want to create a small list, and press Set.
2. Move the Trackball to the first field in the Small List section,
and press Set.
3. To enter annotations in the fields in the Small List section,
select the field and press Set, then do one of the following:
• Type the annotation
• Select the annotation in the Copy from Existing list, and
press Set twice.
You can enter up to three annotations. When you enter an
annotation in the first field of the Small List section, the
selected annotation field on Page1 or Page2 changes to
SMALL LIST.
4. To save the changes, select the Save button.
NOTE: The small list can be displayed as a pop-up window or as a
toggle field. The Small List Operation field on the General
tab allows you to specify how it is displayed.
To Next Page
Loading...
Need help?
General
